Stavební speciality

Ochranné nástěnné prvky | Kryty dilatačních spár | Vstupní rohože

+420 571 412 253
Nabídka
  • Hlavní stránka
  • Produkty
    • Ochrana stěn a dveří Acrovyn®
      Dveře a ochrana dveří Acrovyn®
      Nástěnné obklady na míru Acrovyn by Design®
      Explovent® Explosion Venting
      Kryty dilatačních spár Mifasol®
      Vstupní čisticí zóny Pedisystems®
      Vstupní čisticí zóny Pedisystems®
      Vnější sluneční stínování
  • Projekty
  • Blog
  • Materiály
    • Showcase Acrovyn
      Katalogy
      Market Sectors
  • O nás
  • KONTAKT
  • Careers

CS Explovent at CANMET Canadian Explosives Research Laboratory

Project Summary

CS were approached to develop a reliable replacement for a series of plywood panels on the facade of the Blast Tank Room at the Canadian Explosives Research Laboratory. CS supplied a series of bespoke Explovent panels allowing the facility to simply close the panels after an event has occurred.

Full Case Study

The Bells Corners complex located 12 miles from the center of Ottawa boasts one of the largest and best-equipped indoor facilities for hazardous locations explosion testing in North America.

The Canadian Explosives Research Laboratory (CERL) within the CANMET Mineral Technology Branch of Natural Resources is the only Canadian government laboratory dealing with commercial explosives and equipment for use in hazardous locations, and one of the few in the world.

The facility is equipped with three indoor blast tanks capable of shooting charges of up to 5 kg TNT, a chemistry laboratory handling standard wet chemical analysis, ion chromatography, atomic absorption spectrometer, along with small-scale testing and thermal characterization capabilities.

Design Goals

In the original design and construction of the CANMET Canadian Explosives Research Laboratory lightweight plywood panels clad the exterior wall area of the Blast Tank Room. Daily testing of equipment used in hazardous mining environments would result in deflagrations.

The resultant extreme pressure rise would cause the plywood to release from the exterior of the structure requiring costly reconstruction, replacement and downtime after each and every event. It quickly became apparent to the CANMET operation that in order to ensure a safe and economical operation, a repeatable, self closing explosion release system was an absolute priority.

Results

CS ExploventCS was approached to help develop a reliable and effective solution to the design brief. Two existing 4.5m x 7.3m high openings needed to be filled with repeatable remotely actuated close explosion release panels. The panels would open upon a rise in pressure and would have remote close capability.

The CS Research and Development team not only set about to design a system that met these criteria but also satisified all relevant Building, Fire and NFPA 68 Venting and Deflagration requirements.

A series of 1m x 1.8m high insulated wall panels were designed and aligned in a stacked arrangement. Each panel was equipped with a patented latching mechanism allowing for non destructive site verification of release to within the specified limits as well as a pneumatic air actuator to dampen and decelerate the travel of the panel in addition to providing a means of remote close.

Following repeated openings due to explosive pressures the modified Explovent explosion relief system continues to fulfill the design brief requirements. The preassembled, panelised design provides a handsome facade in keeping with the overall exterior architectural precast finish.

Kam dál

ZÍSKAT BROŽURU
KONTAKTUJTE NÁS
CENA POŽADAVKU
ORDER A SAMPLE
ZEPTEJTE SE

Filed Under: Explosion Venting, Pharmaceutical, Projects Tagged With: Explovent

Explovent®

cs_explovent_brochure_Page_1
  • Průvodce celou škálou produktů
  • Podrobné technické informace

+420 571 412 253
invista@invista.cz
Objednat vzorek
Požádat o cenovou nabídku
Požádat o technickou asistenci

Nabídka

  • Produkty společnosti CS
  • Projekty
  • Blog
  • O nás
  • Kontaktujte nás
  • Pick Country

KONTAKT

INVISTA Craft s.r.o.
4. května 870
755 01 Vsetín
Tel: +420 571 412 253
Email: invista@invista.cz

Ochrana osobních údajů

This website uses cookies to help us give you the best experience when you visit our website. By continuing to use this website, you consent to our use of these cookies. Find out more about how we use cookies and how to manage them below in our privacy policy.
Privacy Policy

Copyright © 2023 · Construction Specialties